How to deal with the sudden disconnection of the mutton slicer frozen meat slicer?

1. First cut off the loose steel wire at the broken line of the mutton slicer frozen meat slicer, and leave two steel wire heads 10 cm longer than the distance between the guide wheels.

2. Use coarse sandpaper to sand the diameter of the two ends of the steel wire to one-half to two-thirds of the original steel wire, and the length should be greater than 5 cm. Then use fine sandpaper to smooth the surface of the steel wire, and then use alcohol to clean it. Wash the two steel wire ends.

3. Put the two ends of the steel wires with 5 cm sand removed and put them together for welding. During this process, use one end of the heavy steel of the electric soldering iron to weld a steel wire. Then use fine sandpaper to sand the place where the mutton slicer is welded, and then wash it with alcohol.

4. The steel wire should have a long section and a loose section, and the loose section should run to the guide rail. The welding head runs out of the guide wheel completely, and the length of a wire from the end of the guide wheel is divided by the groove distance of the guide wheel and then multiplied by the length of one circle of the steel wire guide wheel.