The connection skills of the wire of the kikata nyama ya kondoo

1. Any two of the two capacitors are connected to each other, and then connected to the motor red and the switch wire. The red and white wires of the motor are connected to each other, and then connected to any one of the switches. The remaining motor yellow wire is connected to the 25 capacitor wire, and the black wire is connected to the 150 capacitor wire.

2. If the blade of the mutton slicer is reversed, it can be adjusted by exchanging the two red lines. The 380V wire can be connected arbitrarily. If the blade is reversed, then exchange any two live wires of the three wires of the mutton slicer plug to adjust the alignment. Power on and test the forward and reverse rotation of the machine and other problems.

3. When binding the wires, try to tie them in the direction of the motor of the mutton slicer, which is convenient for maintenance.

When connecting the wires, first disconnect the power supply of the mutton slicer to prevent the danger of electric shock. Connect the wires in the corresponding order. When wiring, pay attention to keeping the two ends of the wires in good contact.