How to solve the failure of the beef and mutton slicer switch

Beef and Mutton Slicer has brought great convenience to the production of hot pot and has contributed to the food industry. However, as long as there are mechanical failures, in order not to affect the production, when the failure occurs, it must be eliminated in time. For example, how to deal with a switch failure during use.

1. The switch of the beef and mutton slicer is sometimes broken. The reason is that the wire inside the switch is loose and there is a problem with the welding. At this time, cut off the power, check carefully, disassemble the welding, or change the switch.

2. The switch of the beef and mutton slicer is not easy to use. At this time, cut off the power first, remove the old switch, and replace it with a new switch. When removing the old switch, pay attention to removing the wire that welds it. After installing the switch, solder the wire in time .

If the switch of the beef and mutton slicer fails, check the switch line inside. If the switch line is normal, try to replace the switch. Please note that the switch should not be activated too frequently during normal use.