Ways to Avoid Dangers When Using a Lab-jeex

1. When the machine is working, do not put your hands and other foreign objects into the casing to avoid danger.

2. Si taxadar leh u hubi in mishiinka wax lagu gooyo uu maqan yahay, dhaawacan yahay ama dabacsan yahay si loo hubiyo in mishiinku xaaladiisu wanaagsan tahay.

3. Check whether there is foreign matter in the shell, and remove the foreign matter in the shell, otherwise it will easily cause damage to the blade.

4. Clean up the operation site, check whether the power supply voltage is consistent with the operating voltage of the machine, and whether the grounding mark is reliably connected to the ground wire.

5. Turn on the switch, press the “ON” button, and check whether the steering is correct (face the pusher dial, and the pusher dial rotates counterclockwise is correct), otherwise, cut off the power supply and adjust the wiring.