site logo

Vegetable high-speed dicing machine

Vegetable high-speed dicing machine

Product structure of vegetable high-speed dicing machine:

1. Control switch;

2. Saklar kaamanan

3. Feeding port

4. Cutting thickness adjustment screw

5. Round knife set adjustment handle

6. Round knife set fixing screws

7. Discharge port

8. Movable pulley

Application scope of vegetable high-speed dicing machine:

Dice, cut size 3-20mm, root vegetables: white radish, carrot, potato, pineapple, taro, sweet potato, melon, onion, green pepper, mango, pineapple, apple, ham, papaya, etc., cut into cubes or strips .

Product performance of vegetable high-speed dicing machine:

1. Cut out size without drop, not easy to be broken, good durability, replaceable knife set to achieve cutting of various sizes.

2. The machine frame is made of SUS304 stainless steel, which is durable.

2. There is a micro switch at the inlet, which is safe to operate.

3. The three-dimensional dicing speed is fast, the yield is high, and it can meet the workload of 25 people in the same time.

Model parameters of vegetable high-speed dicing machine:

ukuran mesin 800 × 700 × 1260 mm
ukuran motong 3-20mm(Not adjustable, need to change the tool set)
beurat 100kg
hasil 500-800   kg/H
Voltaseu 380V 3 fase
kakuatan 0.75kw

Vegetable high-speed dicing machine-Pengiris Domba, Pengiris Sapi, Mesin Senar Domba/Kambing, Mesin Senar Daging Sapi, Pemotong Sayur Multifungsi, Mesin Pembungkus Makanan, Pabrik Cina, Pemasok, Pabrikan, Grosir

Precautions for the operation of vegetable high-speed dicing machine:

  1. First of all, the material to be cut should be washed to remove impurities. If the material to be cut is mixed with sand, gravel and mud, the cutting edge and blade can be easily damaged and blunt. The maximum cutting diameter of the material should not exceed 100mm, if it is larger than this diameter, it must be divided into pieces.
  2. Press the start button and the motor will run. (If the upper cover is not pressed on the frame, the switch XK cannot be pressed, the circuit is blocked, and the motor cannot run)
  3. Put the cut material from the hopper into the hopper evenly and continuously. Under the action of the pusher dial, it is cut to the required thickness by the slicing knife, then cut into strips by the disc wire cutter, and finally horizontally The cutting knife cuts into squares.
  4. The adjustment of the specifications of the dicing machine: it is changed by adjusting the slice thickness, replacing the disc wire cutter and the horizontal cutter.
  5. When the machine is working, do not put your hands and other foreign objects into the shell to avoid danger.