Methods to reduce bearing failure of lamb slicer

Mutton slicer bearing can reduce the friction of the machine in use, thereby preventing the accessories from wearing and reducing rust. If the bearing fails, it will affect the normal operation of the bearing. What are the ways to reduce the failure of the bearing?

1. The damage of the bearing is an important part of the installation. If the installation is not correct, it will directly lead to the change of the stress state between the parts of the whole set of bearings. The bearing will appear prematurely because it is not running normally. Failure and damage bring unnecessary trouble.

2. Before using the mutton slicer, do a performance test on the bearing of the mutton slicer, monitor and check the load, speed, working temperature, vibration, noise and lubrication conditions of the bearing in operation, if found If there is an abnormal situation during use, the cause should be found immediately, and adjustments should be made to resume normal use.

3. Bearing maintenance. In the process of using the lamb slicer, the machine should be maintained frequently. Lubrication of the bearing is in place, which is an important factor in reducing bearing failure.

Before using the mutton slicer, please run it for a trial, carefully observe the operation, pay attention to the method when installing, and maintain the bearing later, which can reduce the probability of bearing failure and improve the slicing efficiency of the machine.