How to quickly clean up the oil stains on the slicer

1. You can add an appropriate amount of water to the roller attached to the mutton slicer, which is conducive to the discharge of impurities; then, you can use some soft cloth or soft brush, and wipe it with water mixed with detergent. After wiping, rinse with clean water once.

2. After the above cleaning work is completed, prepare an appropriate amount of water, then add a certain amount of detergent or disinfectant into the bucket of the mutton slicer, and rotate the bucket for cleaning; after cleaning, use high pressure Use the water gun to clean the inside of the bucket, and simply turn the bucket so that the drain hole is facing down until the water in the bucket is completely drained.

3. However, during the cleaning process, some problems need to be paid attention to. For example, water cannot be sprayed directly on the bearing seat of the mutton slicer, and the control panel of the electrical box cannot touch the water, otherwise it may be damaged due to The impact of water will cause damage, rust and other problems, which will affect the use of equipment.