site logo

Operation process of CNC mutton slicer

Operasie proses van CNC skaapsnyer

1. After receiving the CNC beef and mutton slicer, you should check the outer packaging and other abnormal conditions in time. If there is any abnormality, please call the manufacturer in time, and then read the manual equipped with the beef and mutton slicer carefully. The following operations can be performed.

2. Kontroleer dan of die kragtoevoerspanning ooreenstem met die spanning wat op die etiket van die masjien gemerk is.

3. Na uitpak, plaas asseblief die masjien in ‘n sekere posisie, so ver as moontlik weg van die vogtige omgewing.

4. According to the customer’s cutting size specification, directly input the number and select the required slice thickness.

5. Skakel die krag aan en druk die beginknoppie om te begin.

6. Put the mutton roller to be cut on the platform, press the fast-forward button to the end of the meat roller, and it cannot be pressed tightly. Shake the handwheel so that the meat pressing plate is pressed against the surface of the meat roller, but not too tight. After the thickness is adjusted, press Start button to start.

7. Disassembly method of the blade: Loosen the screw on the blade with a tool to take out the blade. Remove one screw first, tap the screw from the opposite side, and so on, to remove the blade.

Operation process of CNC mutton slicer-Lamsnyer, beesvleissnyer, lams-/skaapsnysnymasjien, beesvleissnymasjien, multifunksionele groentesnyer, voedselverpakkingsmasjien, China-fabriek, verskaffer, vervaardiger, groothandelaar