site logo

The importance of reasonable design of mutton slicer

The importance of reasonable design of פורס כבשים

1. The inspection hole cover of the mutton slicer is too thin, and it is easy to deform after tightening the bolts, making the joint surface uneven and leaking oil from the contact gap;

2. There is no oil return groove on the body, and the lubricating oil accumulates in the shaft seal, end cover, joint surface, etc., and leaks from the gap under the effect of pressure difference;

3. During the operation of the mutton slicer, the oil sump is greatly agitated, and the lubricating oil splashes everywhere in the machine. If the amount of oil is too much, a large amount of lubricating oil will accumulate on the shaft seal, joint surface, etc., resulting in leakage;

4. Early mutton slicers mostly used oil groove and felt ring type shaft seal structure, which caused the felt to be compressed and deformed during assembly, and the joint surface gap was sealed;

5. During equipment maintenance, due to incomplete removal of dirt on the bonding surface, improper selection of sealant, reverse installation of the seal, and failure to replace the seal in time, it may also cause oil leakage.

For the mutton slicer, reasonable design is one of the effective ways to improve work efficiency, and it is also a way to extend its service life and increase its performance.

The importance of reasonable design of mutton slicer-פורס כבש, פורס בקר, מכונת מחרוזת כבש/כבש, מכונת מחרוזת בשר בקר, חותך ירקות רב תכליתי, מכונת אריזת מזון, מפעל בסין, ספק, יצרן, סיטונאי