Pentinge desain cukup saka pangiris daging wedhus

If the design of the lamb slicing machine is unreasonable, it may cause some minor problems in the working process. Therefore, a reasonable design of the slicing machine is very important for both the machine itself and the user.

1. Ing tutup bolongan pengawasan saka slicer daging kambing tipis banget, lan iku gampang kanggo deform sawise tightening bolts, nggawe lumahing peserta ora rata lan bocor lenga saka longkangan kontak;

2. There is no oil return groove on the body, and the lubricating oil accumulates in the shaft seal, end cover, joint surface, etc., and leaks from the gap under the action of the pressure difference;

3. During the operation of the lamb slicing machine, the oil pool is greatly agitated, and the lubricating oil splashes everywhere in the machine. If the amount of oil is too much, a large amount of lubricating oil will accumulate on the shaft seal, joint surface, etc., resulting in leakage;

4. Slicers mutton awal biasane digunakake alur lenga lan felt ring jinis struktur poros segel, kang nyebabake felt kanggo teken lan deformed sak Déwan, lan longkangan lumahing peserta iki nutup;

5. When the equipment is overhauled, due to the incomplete removal of dirt on the joint surface, improper selection of sealant, reverse installation of the seal, and failure to replace the seal in time, it may also cause oil leakage.

Kanggo ngiris daging wedhus, desain sing cukup minangka salah sawijining cara efektif kanggo ningkatake efisiensi kerja, lan uga minangka cara kanggo nambah umur layanan lan nambah kinerja.