Ang kahalagahan ng makatwirang disenyo ng panghiwa ng karne ng tupa

If the design of the lamb slicing machine is unreasonable, it may cause some minor problems in the working process. Therefore, a reasonable design of the slicing machine is very important for both the machine itself and the user.

1. Masyadong manipis ang takip ng butas ng inspeksyon ng mutton slicer, at madaling ma-deform pagkatapos higpitan ang mga bolts, na ginagawang hindi pantay ang magkasanib na ibabaw at tumutulo ang langis mula sa contact gap;

2. There is no oil return groove on the body, and the lubricating oil accumulates in the shaft seal, end cover, joint surface, etc., and leaks from the gap under the action of the pressure difference;

3. During the operation of the lamb slicing machine, the oil pool is greatly agitated, and the lubricating oil splashes everywhere in the machine. If the amount of oil is too much, a large amount of lubricating oil will accumulate on the shaft seal, joint surface, etc., resulting in leakage;

4. Ang mga naunang hiwa ng karne ng tupa ay kadalasang gumagamit ng oil groove at felt ring type shaft seal structure, na naging sanhi ng pag-compress at deformed ng felt sa panahon ng pagpupulong, at ang magkasanib na puwang sa ibabaw ay selyadong;

5. When the equipment is overhauled, due to the incomplete removal of dirt on the joint surface, improper selection of sealant, reverse installation of the seal, and failure to replace the seal in time, it may also cause oil leakage.

Para sa mutton slicer, ang makatwirang disenyo ay isa sa mga epektibong paraan upang mapabuti ang kahusayan sa trabaho, at isa rin itong paraan upang mapahaba ang buhay ng serbisyo nito at mapataas ang pagganap nito.