Before boiling the lamb, we choose a good fresh lamb slicing machine

A good-quality beef and қой етін турау machine is also very user-friendly in the design of every detail. It can survive daily operations without damaging the machine. It has high slicing efficiency and good stability. In recent years, it has appeared on the market. Some highly imitation beef and mutton slicing machines, we call it the copycat version of beef and mutton slicing machines, this kind of slicing machine is close to the real product in appearance and other details cannot withstand the test, so remind consumers and friends to buy Beef and mutton slicing machine, you must look at the qualification of the other party, see if there is related patent certificate, etc., don’t try to be cheap, buy the fake beef and mutton slicing machine, those unreasonable designs will make you crazy

①Сиыр және қой етін турағыштың тексеру саңылауының қақпағы тым жұқа және болттарды қатайтқаннан кейін деформациялануы оңай, түйісу беті біркелкі емес және жанасу саңылауынан май ағып кетеді;

②There is no oil return groove on the body, the lubricating oil accumulates in the shaft seal, end cover, joint surface, etc., and leaks from the gap under the action of the pressure difference;

③Too much oil: When the beef and mutton slicer is in operation, the oil sump is greatly agitated, and the lubricating oil splashes everywhere in the machine. If the amount of oil is too much, a large amount of lubricating oil will accumulate on the shaft seal, joint surface, etc. , Resulting in leakage;

④Білік тығыздағыш құрылымының дизайны негізсіз. Ертедегі сиыр және қой етін кескіштер көбінесе майлы ойық пен киіз сақина типті білік тығыздағыш құрылымын пайдаланды, бұл киіздің жинақтау кезінде сығылып, деформациялануына әкеліп соқтырды, ал қосылыс бетінің саңылауы бітелді;

⑤Improper maintenance process: During equipment maintenance, due to incomplete removal of dirt on the joint surface, improper selection of sealant, reverse installation of the seal, and failure to replace the seal in time, oil leakage may also occur.

Before we choose a slicer, we should pay attention to the five points mentioned above. If there are any of the above phenomena, please don’t buy it. When purchasing, we must go to a regular manufacturer to prevent buying products of poor quality.