How to deal with the sudden disconnection of bevroren vlees snijmachine

1. First cut off the loose steel wire at the broken wire of the frozen meat slicer, leaving two steel wire ends 10 cm longer than the distance between the guide wheels.

2. Gebruik grof schuurpapier om de diameter van de twee uiteinden van de staaldraad te schuren tot de helft tot tweederde van de originele staaldraad, en de lengte moet groter zijn dan 5 cm. Gebruik fijn schuurpapier om het oppervlak van de staaldraad glad te maken en gebruik vervolgens alcohol. Was de twee uiteinden van de staaldraad.

3. The two steel wire ends with 5 cm sand removed are overlapped and welded together. In this process, one end of the heavy steel is used to weld a steel wire with an electric iron. Then use fine sandpaper to smooth the welding place of the frozen meat slicer and wash it with alcohol.

4. There should be a long section of the steel wire that is loose, and run the loose section to the guide rail. The welding head completely runs out of the guide wheel, and the length of a wire from the end of the guide wheel is divided by the groove distance of the guide wheel and then multiplied by the length of one circle of the steel wire guide wheel.