How to solve the failure of the naman sa da naman naman yanki canza

1. The switch of beef and mutton slicing machine is good and sometimes bad. The reason is that the wire inside the switch is loose and there is a welding problem. At this time, cut off the power, check carefully, disassemble the welding, or change the switch.

2. Canjin naman sa da naman naman naman ba shi da sauƙin amfani. A wannan lokacin, yanke wuta da farko, cire tsohon maɓalli, kuma musanya shi da sabon canji. Lokacin cire tsohon canji, kula da cire wayar da ke walda shi. Bayan shigar da canji, sayar da waya cikin lokaci.

If the switch of the beef and mutton slicer fails, check the switch line inside. If the switch line is normal, try to replace the switch. Pay attention to the switch as far as possible not to be activated too frequently during normal use.