How to solve the failure of the inyama yenkomo kunye nenyama yegusha guqula

1. The switch of beef and mutton slicing machine is good and sometimes bad. The reason is that the wire inside the switch is loose and there is a welding problem. At this time, cut off the power, check carefully, disassemble the welding, or change the switch.

2. Ukutshintsha kwenyama yenkomo kunye ne-mutton slicer akukho lula ukuyisebenzisa. Ngeli xesha, cima amandla kuqala, susa isitshixo esidala, kwaye sibuyisele iswitshi entsha. Xa ususa isitshixo esidala, nikela ingqalelo ekususeni ucingo oluludibanisayo. Emva kokufaka iswitshi, solder ucingo ngexesha.

If the switch of the beef and mutton slicer fails, check the switch line inside. If the switch line is normal, try to replace the switch. Pay attention to the switch as far as possible not to be activated too frequently during normal use.