How to solve the failure of the alat pengiris daging sapi dan kambing saklar

1. The switch of beef and mutton slicing machine is good and sometimes bad. The reason is that the wire inside the switch is loose and there is a welding problem. At this time, cut off the power, check carefully, disassemble the welding, or change the switch.

2. Saklar alat pengiris daging sapi dan kambing tidak mudah digunakan. Pada saat ini, matikan daya terlebih dahulu, lepaskan sakelar lama, dan ganti dengan sakelar baru. Saat melepas sakelar lama, perhatikan pelepasan kabel yang mengelasnya. Setelah memasang sakelar, solder kawat tepat waktu.

If the switch of the beef and mutton slicer fails, check the switch line inside. If the switch line is normal, try to replace the switch. Pay attention to the switch as far as possible not to be activated too frequently during normal use.