How to solve the failure of the kikata nyama ya ng’ombe na kondoo kubadili

1. The switch of beef and mutton slicing machine is good and sometimes bad. The reason is that the wire inside the switch is loose and there is a welding problem. At this time, cut off the power, check carefully, disassemble the welding, or change the switch.

2. Swichi ya kukata nyama ya ng’ombe na mutton si rahisi kutumia. Kwa wakati huu, kata nguvu kwanza, ondoa swichi ya zamani, na ubadilishe na swichi mpya. Wakati wa kuondoa swichi ya zamani, makini na kuondoa waya ambayo huiweka. Baada ya kusakinisha swichi, solder waya kwa wakati.

If the switch of the beef and mutton slicer fails, check the switch line inside. If the switch line is normal, try to replace the switch. Pay attention to the switch as far as possible not to be activated too frequently during normal use.