How to solve the failure of the inyama yenkomo kanye nenyama yemvu switch

1. The switch of beef and mutton slicing machine is good and sometimes bad. The reason is that the wire inside the switch is loose and there is a welding problem. At this time, cut off the power, check carefully, disassemble the welding, or change the switch.

2. Ukushintsha kwenyama yenkomo neyemvu akulula ukukusebenzisa. Ngalesi sikhathi, nqamula amandla kuqala, khipha iswishi endala, bese ufaka iswishi entsha esikhundleni sayo. Uma ukhipha iswishi endala, naka ukukhipha intambo eluyishiselayo. Ngemva kokufaka iswishi, solder intambo ngesikhathi .

If the switch of the beef and mutton slicer fails, check the switch line inside. If the switch line is normal, try to replace the switch. Pay attention to the switch as far as possible not to be activated too frequently during normal use.