Cómo conectar el cable del cortadora de cordero

The mutton slicer is a machine used to cut mutton. Restaurants, especially hot pot restaurants, cannot do without it. The current slicer cannot operate without electricity. How to connect the wires in it includes several tips.

1. Dos de los dos condensadores se conectan entre sí y luego se conectan a la fase roja del motor y la línea del interruptor. Conecte los cables rojo y blanco del motor entre sí y luego conéctelos a cualquiera de los interruptores. El cable amarillo del motor restante está conectado al cable del condensador de 25 y el cable negro está conectado al cable del condensador de 150.

2. If the lamb slicing machine blade is reversed, the two red lines can be exchanged to adjust it. The 380V wires are connected at will. If the blade is reversed, the three wires of the mutton slicer plug can be exchanged with any two live wires to adjust it. Power on the machine to test the forward and reverse rotation and other problems.

3. When binding the wires, they should be tied to the direction of the lamb slicer motor as much as possible to facilitate maintenance.

When connecting wires, first disconnect the power of the mutton slicer to prevent the danger of electric shock. Connect the wires in the corresponding order. When wiring, pay attention to keeping the two ends of the wire in good contact.