Indlela yokudibanisa ucingo lwe isiceli segusha

The mutton slicer is a machine used to cut mutton. Restaurants, especially hot pot restaurants, cannot do without it. The current slicer cannot operate without electricity. How to connect the wires in it includes several tips.

1. Naziphi na ezimbini ze-capacitors zixhunywe omnye komnye, kwaye emva koko zixhunywe kwisigaba esibomvu se-motor kunye nomgca wokutshintsha. Qhagamshela iingcingo ezibomvu nezimhlophe zemoto omnye komnye, uze uqhagamshele kuyo nayiphi na into yokutshintsha. Intambo ephuzi yemoto eseleyo ixhunyiwe kwi-capacitor wire ye-25, kwaye ucingo olumnyama luxhunyiwe kwi-capacitor wire ye-150.

2. If the lamb slicing machine blade is reversed, the two red lines can be exchanged to adjust it. The 380V wires are connected at will. If the blade is reversed, the three wires of the mutton slicer plug can be exchanged with any two live wires to adjust it. Power on the machine to test the forward and reverse rotation and other problems.

3. When binding the wires, they should be tied to the direction of the lamb slicer motor as much as possible to facilitate maintenance.

When connecting wires, first disconnect the power of the mutton slicer to prevent the danger of electric shock. Connect the wires in the corresponding order. When wiring, pay attention to keeping the two ends of the wire in good contact.