Yuav ua li cas txuas cov hlau ntawm lub nqaij nyuj slicer

The mutton slicer is a machine used to cut mutton. Restaurants, especially hot pot restaurants, cannot do without it. The current slicer cannot operate without electricity. How to connect the wires in it includes several tips.

1. Ib qho ntawm ob qho ntawm ob lub capacitor yog txuas rau ib leeg, thiab tom qab ntawd txuas nrog rau theem liab ntawm lub cev muaj zog thiab cov kab hloov. Txuas cov xov hlau liab thiab dawb ntawm lub cev muaj zog rau ib leeg, thiab txuas mus rau ib qho ntawm cov keyboards. Cov xaim daj ntawm lub cev muaj zog txuas nrog lub capacitor hlau ntawm 25, thiab cov hlau dub txuas nrog lub capacitor hlau ntawm 150.

2. If the lamb slicing machine blade is reversed, the two red lines can be exchanged to adjust it. The 380V wires are connected at will. If the blade is reversed, the three wires of the mutton slicer plug can be exchanged with any two live wires to adjust it. Power on the machine to test the forward and reverse rotation and other problems.

3. When binding the wires, they should be tied to the direction of the lamb slicer motor as much as possible to facilitate maintenance.

When connecting wires, first disconnect the power of the mutton slicer to prevent the danger of electric shock. Connect the wires in the corresponding order. When wiring, pay attention to keeping the two ends of the wire in good contact.