のワイヤーを接続する方法 マトンスライサー

The mutton slicer is a machine used to cut mutton. Restaurants, especially hot pot restaurants, cannot do without it. The current slicer cannot operate without electricity. How to connect the wires in it includes several tips.

1. 25つのコンデンサのいずれか150つを相互に接続してから、モーターの赤相とスイッチラインに接続します。 モーターの赤と白のワイヤーを相互に接続してから、いずれかのスイッチに接続します。 残りのモーターの黄色いワイヤーはXNUMXのコンデンサーワイヤーに接続され、黒いワイヤーはXNUMXのコンデンサーワイヤーに接続されます。

2. If the lamb slicing machine blade is reversed, the two red lines can be exchanged to adjust it. The 380V wires are connected at will. If the blade is reversed, the three wires of the mutton slicer plug can be exchanged with any two live wires to adjust it. Power on the machine to test the forward and reverse rotation and other problems.

3. When binding the wires, they should be tied to the direction of the lamb slicer motor as much as possible to facilitate maintenance.

When connecting wires, first disconnect the power of the mutton slicer to prevent the danger of electric shock. Connect the wires in the corresponding order. When wiring, pay attention to keeping the two ends of the wire in good contact.