Disassembly method of ఘనీభవించిన మాంసం స్లైసర్

After the frozen meat slicer has been used for a period of time, it is often necessary to clean it. First, cut off the power supply and disassemble the equipment. The disassembly method is very important, and its disassembly should be carried out according to the following steps:

1. The first disassembly and assembly of the charging tray is to prevent the sundries in the charging tray from falling into the inside of the machine. The main disassembly and assembly tool of the frozen meat slicer is a disassembly wrench.

2. When disassembling the frozen meat slicer, disassemble it in a clockwise direction, and disassemble it according to the installation sequence. First remove the nut in front of the machine, then remove the meat plate and meat grinder, then remove the push screw, and then remove the T-shaped meat grinder.

3. The purpose of dismantling in accordance with the installation sequence is to ensure the correctness of the machine installation after cleaning, and to avoid the normal use of the frozen meat slicer due to incorrect installation of parts.

When the frozen meat slicer is disassembled, follow the steps described above. After cleaning, and after the equipment is naturally air-dried, install it according to the disassembly steps. At the same time, check the equipment in time to see if there is any abnormality. At the same time, check the equipment regularly. Add lubricating oil.