site logo

راه حل مشکلات مدار داخلی دستگاه برش گوشت گوسفند

راه حل مشکلات مدار داخلی دستگاه برش گوشت گوسفند

mutton slicer is the main equipment for cutting mutton. It is an indispensable equipment for hot pot restaurants. Today’s machines are basically automated, and this is related to the internal circuit. What should I do if there is a problem with the internal circuit?

1. ابتدا سیم فولادی شل را از سیم شکسته جدا کنید و دو سر سیم فولادی را 10 سانتی متر بلندتر از فاصله بین چرخ های راهنما بگذارید.

2. از کاغذ سنباده درشت برای سنباده زدن قطر دو سر سیم فولادی به 1/2-2/3 سیم فولادی قطعه قطعه گوشت گوسفندی اصلی استفاده کنید و طول آن باید بیشتر از 5 سانتی متر باشد. برای صاف کردن سطح سیم فولادی از کاغذ سنباده ریز استفاده کنید و دوباره از آن استفاده کنید. دو انتهای سیم فولادی را با الکل بشویید.

3. دو انتهای سیم فولادی با ماسه 5 سانتی متری برداشته شده روی هم قرار گرفته و به هم جوش داده می شوند. برای جوش دادن یک سر سیم فولادی به روش هومیوپاتی از یک آهن لحیم کاری برقی استفاده کنید. دو سر سیم فولادی باید کاملاً روی هم قرار گیرند و سیم فولادی را نمی توان تاب داد. وقتی بلند می شوم فقط می توانم دوباره لحیم کنم و سپس از سمباده ریز برای صاف کردن محل جوش استفاده کنم و با الکل بشوییم.

4. There must be a long section of the steel wire that is loose, and run the loose section to the rail of the mutton slicer.

5. Divide the length of a wire from the end of the guide wheel by the groove distance of the guide wheel and multiply it by the length of one turn of the steel wire guide wheel.

6. ​​Accelerate every second until the speed reaches normal, and then cut.

If there is a problem with the internal circuit of the mutton slicer, first cut off the power supply and check whether the wire is in good contact. You can solve it according to the above methods and let the slicer run smoothly.

راه حل مشکلات مدار داخلی دستگاه برش گوشت گوسفند-Lamb slicer, beef slicer, lamb/mutton wear string machine, beef wear string machine, Multifunctional vegetable cutter, Food packaging machine, China factory, supplier, manufacturer, wholesaler