内部电路问题的解决方案 羊肉切片机

mutton slicer is the main equipment for cutting mutton. It is an indispensable equipment for hot pot restaurants. Today’s machines are basically automated, and this is related to the internal circuit. What should I do if there is a problem with the internal circuit?

1、先将断丝处松散的钢丝剪掉，使两根钢丝末端比导轮之间的距离长10厘米。

2、用粗砂纸将钢丝两端的直径打磨至原羊肉切片机钢丝的1/2-2/3，长度应大于5厘米。 用细砂纸将钢丝表面打磨光滑，然后再使用。 用酒精清洗两根钢丝末端。

3.将去除5厘米沙子的两条钢丝末端重叠焊接在一起。 使用电烙铁顺势焊接钢丝的一端。 两条钢丝末端必须完全重叠，钢丝不能翘曲。 起床后只能重新焊接，然后用细砂纸将焊接处磨平，用酒精清洗。

4. There must be a long section of the steel wire that is loose, and run the loose section to the rail of the mutton slicer.

5. Divide the length of a wire from the end of the guide wheel by the groove distance of the guide wheel and multiply it by the length of one turn of the steel wire guide wheel.

6. ​​Accelerate every second until the speed reaches normal, and then cut.

If there is a problem with the internal circuit of the mutton slicer, first cut off the power supply and check whether the wire is in good contact. You can solve it according to the above methods and let the slicer run smoothly.