How should the reamer of the alat pengiris domba be properly assembled?

The cutting edge of the reamer is installed along the transfer of the cutter. The reamer is made of tool steel, and the blade must be sharp. After a period of use, the blade will become dull. At this time, the blade should be replaced with a new blade or re-sharpened. Otherwise, the cutting efficiency of the mutton slicer will be affected, and it may be boring instead of chopping. After being discharged, it is discharged into a slurry after extrusion and grinding, which directly affects the quality of the finished product.

Setelah merakit atau mengganti reamer alat pengiris daging kambing, mur pengencang harus dikencangkan untuk memastikan bahwa kisi-kisi tidak bergerak. memengaruhi. Alat untuk membesarkan lubang harus berada dalam kontak dekat dengan kisi-kisi, jika tidak maka akan mempengaruhi efisiensi pemotongan alat pengiris daging kambing.

The reamer is the main part of the mutton slicer, which plays the role of cutting mutton slices. Its assembly should be in accordance with the regulations, and the screws on it should be tightened, so that the reamer will be fixed on the slicer for a long time.