site logo

Common problems and solutions of frozen meat slicer

ની સામાન્ય સમસ્યાઓ અને ઉકેલો સ્થિર માંસ સ્લાઇસર

1. The slicing is uneven and dull, resulting in more powder.

(1) Reason: the blade is not sharp; the hardness of the sliced ​​material is too high; the sticky juice of the sliced ​​material sticks the blade; the force is uneven.

(2) Maintenance method: remove the blade and sharpen it with a grindstone; bake the sliced ​​material to soften it; remove the blade to grind off the sticky juice; use even force when slicing.

2. After the power is turned on, the motor of the frozen meat slicer does not run.

(1) Reason: The power supply is in poor contact or the plug is loose; the switch is in poor contact.

(2) Maintenance method: repair the power supply or replace the plug; repair or replace the switch of the same specification.

3. કામ કરતી વખતે, મોટર ફરતી અટકે છે.

(1) Reason: The frozen meat slicer feeds too much, and the knife plate is stuck; the switch is in poor contact.

(2) Maintenance method: look at the cutter head and take out the stuck material; adjust the switch contact or exchange the switch.

When using the frozen meat slicer, you should press the other side of the device with your hand, otherwise the material will jump and the cutting will not be in place. Slice.

Common problems and solutions of frozen meat slicer-લેમ્બ સ્લાઇસર, બીફ સ્લાઇસર, લેમ્બ/મટન વેર સ્ટ્રિંગ મશીન, બીફ વેર સ્ટ્રિંગ મશીન, મલ્ટિફંક્શનલ વેજિટેબલ કટર, ફૂડ પેકેજિંગ મશીન, ચાઇના ફેક્ટરી, સપ્લાયર, ઉત્પાદક, જથ્થાબંધ વેપારી