site logo

Common fault analysis of frozen meat slicer

Common fault analysis of slicer daging beku

1. The machine does not run: check whether the plug is in good contact, and then check whether the socket insurance is blown. If the fault still cannot be eliminated, it needs to be repaired by electrical technicians, and non-professionals cannot repair it by themselves.

2. Awakna electrified: geuwat cabut colokan kakuatan tina slicer daging beku, pariksa naha grounding téh alus, sarta ménta teknisi listrik pikeun nungkulan eta.

3. The slicing effect is not good: check whether the blade is sharp; check whether the temperature of the frozen meat is in the range of 0°C to -7°C; re-sharpen the blade edge.

4. The pallet does not move smoothly: add lubricating oil to the moving round shaft, and adjust the top tightening screw under the moving square shaft.

5. Abnormal noise when working: Check whether the machine bolts are loose, check whether the lubricating oil in the moving part of the machine is used up, and check whether there is broken meat on the circumference of the blade.

6. The machine vibrates or makes a slight noise: check whether the workbench is stable and whether the machine is placed smoothly.

7. The grinding wheel cannot sharpen the knife normally: clean the grinding wheel of the slicer.

8. When slicing, the machine is unable to check whether the transmission belt is stained with oil or disconnected, check whether the capacitor is aging, and check whether the blade edge is sharp.

Common fault analysis of frozen meat slicer-Pengiris Domba, Pengiris Sapi, Mesin Senar Domba/Kambing, Mesin Senar Daging Sapi, Pemotong Sayur Multifungsi, Mesin Pembungkus Makanan, Pabrik Cina, Pemasok, Pabrikan, Grosir