How to install grinding wheel on frozen meat slicer

பயன்படுத்தும் போது உறைந்த இறைச்சி ஸ்லைசர், the help of the grinding wheel is needed. When installing the grinding wheel, pay attention to adjusting its height to ensure that the outer circle of the knife enters the grinding wheel. How is the grinding wheel of the machine installed?

1. As the wear of the outer circle of the knife decreases, the installation height of the grinding wheel of the frozen meat slicer is also reduced, and it is still ensured that the outer circle of the knife enters the inner circle of the grinding wheel by 2~4mm. When the knife is rotating, rotate the sharpening knife clockwise to make the grinding wheel lean on the back of the knife, and the knife will drive the grinding wheel to rotate at a high speed. Sparks are generated during the sharpening process. This is normal, that is, automatic sharpening.

2. Pay attention to the sharpening process during the sharpening. Turn the sharpening button counterclockwise to make the grinding wheel away from the knife, turn off the frozen meat slicer switch to stop the rotation of the knife, and observe the sharpening effect when the knife is still. Repeat the above process until the knife is sharpened. During the sharpening process, the force of rotating the knife sharpening knob should not be too strong, just generate sparks. Excessive force may cause the grinding wheel to rupture and cause an accident.

When installing the grinding wheel, pay attention to the distance and turn off the switch. It helps the high-efficiency work of the frozen meat slicer. Pay attention to safety during the sharpening process.