site logo

Giunsa ang pag-atubang sa kalit nga pagkaputol sa frozen meat slicer

Unsaon pag-atubang sa kalit nga pagkaputol sa frozen nga karne slicer

1. First, cut off the loose steel wire where the wire of the frozen meat slicer is broken, and leave two steel wire heads that are 10 cm longer than the distance between the guide wheels.

2. Gamita ang coarse sandpaper sa pag-sand sa diametro sa duha ka tumoy sa steel wire ngadto sa tunga ngadto sa dos-tersiya sa orihinal nga steel wire, ug ang gitas-on kinahanglan nga labaw pa sa 5 cm. Gamita ang pinong sandpaper aron mahapsay ang nawong sa steel wire, ug dayon gamita ang alkohol aron mahapsay ang nawong sa steel wire. Hugasi nga limpyo ang duha ka puthaw nga tumoy.

3. The two steel wire ends with sand removed 5 cm are overlapped and welded together. In this process, one end of the heavy steel wire is used to weld a steel wire. The two steel wire ends must be completely overlapped so that the steel wire cannot be lifted. Then use fine sandpaper to smooth the welding place of the mutton slicer and the frozen meat slicer, and then wash it with alcohol.

  1. The steel wire should have a long and loose section, and the loose section should be run to the guide rail. The welding head completely runs out of the guide pulley, and the length of a wire from the end of the guide pulley is divided by the groove distance of the guide pulley and multiplied by the length of one circle of the steel wire guide pulley.

Giunsa ang pag-atubang sa kalit nga pagkaputol sa frozen meat slicer-Lamb slicer, beef slicer, lamb/mutton wear string machine, beef wear string machine, Multifunctional vegetable cutter, Food packaging machine, China factory, supplier, manufacturer, wholesaler