갑자기 끊겼을 때 대처법 냉동 고기 슬라이서

1. First, cut off the loose steel wire where the wire of the frozen meat slicer is broken, and leave two steel wire heads that are 10 cm longer than the distance between the guide wheels.

2. 굵은 사포를 사용하여 강선 양단의 지름을 원래 강선의 5/XNUMX~XNUMX/XNUMX로 연마하고 길이는 XNUMXcm 이상이어야 합니다. 가는 사포를 사용하여 강선의 표면을 매끄럽게 한 다음 알코올을 사용하여 강선의 표면을 매끄럽게 합니다. 두 개의 강철 와이어 끝을 깨끗하게 씻으십시오.

3. The two steel wire ends with sand removed 5 cm are overlapped and welded together. In this process, one end of the heavy steel wire is used to weld a steel wire. The two steel wire ends must be completely overlapped so that the steel wire cannot be lifted. Then use fine sandpaper to smooth the welding place of the mutton slicer and the frozen meat slicer, and then wash it with alcohol.

1. The steel wire should have a long and loose section, and the loose section should be run to the guide rail. The welding head completely runs out of the guide pulley, and the length of a wire from the end of the guide pulley is divided by the groove distance of the guide pulley and multiplied by the length of one circle of the steel wire guide pulley.