តើធ្វើដូចម្តេចដើម្បីដោះស្រាយជាមួយនឹងការផ្តាច់ភ្លាមៗនៃ ចំណិតសាច់ក្លាសេ

1. First, cut off the loose steel wire where the wire of the frozen meat slicer is broken, and leave two steel wire heads that are 10 cm longer than the distance between the guide wheels.

2. ប្រើក្រដាសខ្សាច់ស្តើងដើម្បីបូមខ្សាច់អង្កត់ផ្ចិតនៃចុងទាំងពីរនៃខ្សែដែកទៅពាក់កណ្តាលទៅពីរភាគបីនៃខ្សែដែកដើមហើយប្រវែងគួរតែធំជាង 5 សង់ទីម៉ែត្រ។ ប្រើក្រដាសខ្សាច់ល្អដើម្បីរលោងផ្ទៃនៃខ្សែដែកហើយបន្ទាប់មកប្រើជាតិអាល់កុលដើម្បីធ្វើឱ្យផ្ទៃនៃខ្សែដែករលោង។ លាង​ចុង​ដែក​ទាំង​ពីរ​ឱ្យ​ស្អាត។

3. The two steel wire ends with sand removed 5 cm are overlapped and welded together. In this process, one end of the heavy steel wire is used to weld a steel wire. The two steel wire ends must be completely overlapped so that the steel wire cannot be lifted. Then use fine sandpaper to smooth the welding place of the mutton slicer and the frozen meat slicer, and then wash it with alcohol.

1. The steel wire should have a long and loose section, and the loose section should be run to the guide rail. The welding head completely runs out of the guide pulley, and the length of a wire from the end of the guide pulley is divided by the groove distance of the guide pulley and multiplied by the length of one circle of the steel wire guide pulley.