च्या अचानक डिस्कनेक्शनला कसे सामोरे जावे गोठलेले मांस स्लायसर

1. First, cut off the loose steel wire where the wire of the frozen meat slicer is broken, and leave two steel wire heads that are 10 cm longer than the distance between the guide wheels.

2. स्टील वायरच्या दोन टोकांचा व्यास मूळ स्टील वायरच्या दीड ते दोन-तृतीयांश पर्यंत वाळू देण्यासाठी खडबडीत सॅंडपेपर वापरा आणि लांबी 5 सेमी पेक्षा जास्त असावी. स्टील वायरची पृष्ठभाग गुळगुळीत करण्यासाठी बारीक सॅंडपेपर वापरा आणि नंतर स्टील वायरची पृष्ठभाग गुळगुळीत करण्यासाठी अल्कोहोल वापरा. दोन स्टील वायरचे टोक स्वच्छ धुवा.

3. The two steel wire ends with sand removed 5 cm are overlapped and welded together. In this process, one end of the heavy steel wire is used to weld a steel wire. The two steel wire ends must be completely overlapped so that the steel wire cannot be lifted. Then use fine sandpaper to smooth the welding place of the mutton slicer and the frozen meat slicer, and then wash it with alcohol.

1. The steel wire should have a long and loose section, and the loose section should be run to the guide rail. The welding head completely runs out of the guide pulley, and the length of a wire from the end of the guide pulley is divided by the groove distance of the guide pulley and multiplied by the length of one circle of the steel wire guide pulley.