Како се носити са изненадним прекидом везе резач смрзнутог меса

1. First, cut off the loose steel wire where the wire of the frozen meat slicer is broken, and leave two steel wire heads that are 10 cm longer than the distance between the guide wheels.

2. Користите груби брусни папир за брушење пречника два краја челичне жице до једне половине до две трећине оригиналне челичне жице, а дужина треба да буде већа од 5 цм. Користите фини брусни папир да бисте загладили површину челичне жице, а затим користите алкохол да бисте загладили површину челичне жице. Очистите два краја челичне жице.

3. The two steel wire ends with sand removed 5 cm are overlapped and welded together. In this process, one end of the heavy steel wire is used to weld a steel wire. The two steel wire ends must be completely overlapped so that the steel wire cannot be lifted. Then use fine sandpaper to smooth the welding place of the mutton slicer and the frozen meat slicer, and then wash it with alcohol.

1. The steel wire should have a long and loose section, and the loose section should be run to the guide rail. The welding head completely runs out of the guide pulley, and the length of a wire from the end of the guide pulley is divided by the groove distance of the guide pulley and multiplied by the length of one circle of the steel wire guide pulley.