Phenomenon uas yuav tsum tau zam nyob rau hauv kev tsim nqaij nyuj thiab nqaij nyuj slicer

1. During the design process, the thickness of the inspection hole cover plate configured for the beef and mutton slicer is insufficient, so that it is easy to deform after the bolt is tightened, resulting in an uneven joint surface and oil leakage from the contact gap .

2. Tsis muaj roj rov qab zawj rau ntawm lub cev, yog li nws yooj yim los ua kom cov roj lubricating tuaj yeem sib sau ua ke hauv lub tog raj kheej, npog kawg, sib koom ua ke thiab lwm yam haujlwm. Nyob rau hauv qhov kev txiav txim ntawm qhov sib txawv siab, nws yuav tawm los ntawm qee qhov khoob.

3. Too much lubricating oil is added. In this case, when the beef and mutton slicer is in normal operation, the oil sump will be greatly agitated, causing the lubricating oil to splash everywhere in the machine. And if the amount of oil is particularly large, it will also cause leakage.

4. Kev tsim cov qauv ntawm cov ncej foob tsis tsim nyog. Piv txwv li, cov roj groove thiab hnov ​​lub nplhaib hom ncej foob qauv feem ntau yog siv ua ntej. Nyob rau hauv txoj kev no, qhov teeb meem ntawm compression deformation kuj tshwm sim thaum lub sij hawm sib dhos txheej txheem.

5. The maintenance method is unreasonable. When the beef and mutton slicer has some abnormal conditions, we need to carry out the maintenance in time. And if there are problems such as incomplete removal of dirt on the joint surface, improper selection of sealant, or reverse installation of the seal, it is likely to cause oil leakage.