site logo

Phenomenon that should be avoided in designing beef and mutton slicer

وہ رجحان جس سے ڈیزائننگ میں گریز کیا جانا چاہیے۔ گائے کا گوشت اور مٹن سلائسر

1. During the design process, the thickness of the inspection hole cover plate configured for the beef and mutton slicer is insufficient, so that it is easy to deform after the bolt is tightened, resulting in an uneven joint surface and oil leakage from the contact gap .

2. جسم پر تیل کی واپسی کی نالی نہیں ہے، اس لیے چکنا کرنے والے تیل کو شافٹ سیل، اینڈ کور، جوائنٹ سطح اور دیگر پوزیشنوں میں جمع کرنا آسان ہے۔ دباؤ کے فرق کی کارروائی کے تحت، یہ کچھ خلا سے باہر نکل جائے گا۔

3. Too much lubricating oil is added. In this case, when the beef and mutton slicer is in normal operation, the oil sump will be greatly agitated, causing the lubricating oil to splash everywhere in the machine. And if the amount of oil is particularly large, it will also cause leakage.

4. شافٹ مہر کی ساخت کا ڈیزائن غیر معقول ہے۔ مثال کے طور پر، تیل کی نالی اور محسوس کی انگوٹی کی قسم شافٹ سیل ڈھانچہ زیادہ تر پہلے استعمال کیا جاتا تھا. اس طرح، اسمبلی کے عمل کے دوران کمپریشن اخترتی کا مسئلہ بھی پیش آنے کا خطرہ ہے۔

5. The maintenance method is unreasonable. When the beef and mutton slicer has some abnormal conditions, we need to carry out the maintenance in time. And if there are problems such as incomplete removal of dirt on the joint surface, improper selection of sealant, or reverse installation of the seal, it is likely to cause oil leakage.

Phenomenon that should be avoided in designing beef and mutton slicer-لیمب سلائسر، بیف سلائسر، لیمب/مٹن وئیر سٹرنگ مشین، بیف وئیر سٹرنگ مشین، ملٹی فنکشنل ویجیٹیبل کٹر، فوڈ پیکجنگ مشین، چائنا فیکٹری، سپلائر، مینوفیکچرر، تھوک فروش

Phenomenon that should be avoided in designing beef and mutton slicer-لیمب سلائسر، بیف سلائسر، لیمب/مٹن وئیر سٹرنگ مشین، بیف وئیر سٹرنگ مشین، ملٹی فنکشنل ویجیٹیبل کٹر، فوڈ پیکجنگ مشین، چائنا فیکٹری، سپلائر، مینوفیکچرر، تھوک فروش