Fenomena yang harus dielakkan dalam mereka bentuk pemotong daging lembu dan kambing

1. During the design process, the thickness of the inspection hole cover plate configured for the beef and mutton slicer is insufficient, so that it is easy to deform after the bolt is tightened, resulting in an uneven joint surface and oil leakage from the contact gap .

2. Tiada alur pengembalian minyak pada badan, jadi mudah untuk menyebabkan minyak pelincir berkumpul di kedap aci, penutup hujung, permukaan sendi dan kedudukan lain. Di bawah tindakan perbezaan tekanan, ia akan bocor keluar dari beberapa celah.

3. Too much lubricating oil is added. In this case, when the beef and mutton slicer is in normal operation, the oil sump will be greatly agitated, causing the lubricating oil to splash everywhere in the machine. And if the amount of oil is particularly large, it will also cause leakage.

4. Reka bentuk struktur kedap aci adalah tidak munasabah. Sebagai contoh, alur minyak dan struktur kedap aci jenis gelang rasa kebanyakannya digunakan sebelum ini. Dengan cara ini, masalah ubah bentuk mampatan juga terdedah untuk berlaku semasa proses pemasangan.

5. The maintenance method is unreasonable. When the beef and mutton slicer has some abnormal conditions, we need to carry out the maintenance in time. And if there are problems such as incomplete removal of dirt on the joint surface, improper selection of sealant, or reverse installation of the seal, it is likely to cause oil leakage.