Problems and solutions of frozen beef and sheep slicer

1. Feliile sunt neuniforme, plictisitoare și produc mai multă pulbere.

(1) Reason: The blade is not sharp; the hardness of the sliced material is too high; the sticky juice of the sliced material will stick the blade; the force is even when not slicing.

2. The motor of the frozen meat slicer does not run after power on.

(1) Motiv: Contact slab de alimentare sau ștecher slăbit; Contact slab al comutatorului.

(2) Maintenance method: repair the power supply or exchange the plug; repair or replace the switch of the same specification.

3. În timpul lucrului, motorul se oprește din rotație.

(1) Reason: The frozen meat slicer feeds too much, and the cutter head is stuck; the switch is in poor contact. Evenly.

(2) Maintenance method: remove the blade and sharpen it with a grindstone; dry the sliced materials soft; remove the blade to grind off the sticky juice; look at the cutter head and take out the stuck material; adjust the switch contact or change the switch.