Fenomena anu kedah dihindari dina ngarancang daging sapi jeung mutton slicer

1. During the design process, the thickness of the inspection hole cover plate configured for the beef and mutton slicer is insufficient, so that it is easy to deform after the bolt is tightened, resulting in an uneven joint surface and oil leakage from the contact gap .

2. Aya henteu alur balik minyak dina awak, jadi gampang ngabalukarkeun minyak lubricating pikeun ngumpulkeun dina segel aci, panutup tungtung, beungeut gabungan sarta posisi séjén. Dina aksi bédana tekanan, éta bakal bocor kaluar tina sababaraha sela.

3. Too much lubricating oil is added. In this case, when the beef and mutton slicer is in normal operation, the oil sump will be greatly agitated, causing the lubricating oil to splash everywhere in the machine. And if the amount of oil is particularly large, it will also cause leakage.

4. Desain struktur segel aci teu munasabah. Salaku conto, alur minyak sareng struktur segel aci jinis ring anu paling sering dianggo sateuacanna. Ku cara kieu, masalah deformasi komprési ogé rawan lumangsung salila prosés assembly.

5. The maintenance method is unreasonable. When the beef and mutton slicer has some abnormal conditions, we need to carry out the maintenance in time. And if there are problems such as incomplete removal of dirt on the joint surface, improper selection of sealant, or reverse installation of the seal, it is likely to cause oil leakage.