Common faults and solutions of lamb slicing machine

　　 1. Stroj ne radi: provjerite je li utikač u dobrom kontaktu, a zatim provjerite je li osigurač u utičnici pregorio. Ako se kvar ne može otkloniti, potrebno ga je provjeriti i popraviti od strane elektrotehničara. Neprofesionalci to ne mogu sami popraviti.

　　2. The body is electrified: you must unplug the power plug immediately, check whether the grounding is good, and ask an electrical technician to deal with it.

　　3. Poor slicing effect: check whether the blade is sharp; check whether the temperature of the frozen meat is in the range (0℃~ -7℃); refer to the manual sharpening method to re-sharp the blade edge.

　　4. Ladica se ne pomiče glatko: dodajte ulje za podmazivanje u pokretnu okruglu osovinu i namjestite zatezni vijak ispod pokretne četvrtaste osovine.

　　 5. Abnormal noise when the mutton slicer is working: check whether the bolts of the machine are loose, check whether the lubricating oil in the moving part of the machine is used up, and check whether there is any minced meat on the circumference of the blade.

　　 6. Vibracije ili slaba buka stroja: Provjerite je li radni stol stabilan i je li stroj postavljen glatko.

　　 7. The grinding wheel cannot sharpen the knife normally: clean the grinding wheel.

8. When the slicing machine is working, the machine is unable to check whether the transmission belt is stained with oil or disconnected, check whether the capacitor is aging, and check whether the cutting edge of the lamb slicer blade is sharp.