Common faults and solutions of lamb slicing machine

　　 1、機器不工作：檢查插頭是否接觸良好，再檢查插座保險絲是否熔斷。 如果不能排除故障，則需要由電氣技術人員進行檢查和修理。 非專業人士無法自行維修。

　　2. The body is electrified: you must unplug the power plug immediately, check whether the grounding is good, and ask an electrical technician to deal with it.

　　3. Poor slicing effect: check whether the blade is sharp; check whether the temperature of the frozen meat is in the range (0℃~ -7℃); refer to the manual sharpening method to re-sharp the blade edge.

　　4、托盤移動不順暢：在移動圓軸上加潤滑油，調整移動方軸下方的緊固螺絲。

　　 5. Abnormal noise when the mutton slicer is working: check whether the bolts of the machine are loose, check whether the lubricating oil in the moving part of the machine is used up, and check whether there is any minced meat on the circumference of the blade.

　　 6、機器震動或輕微噪音：檢查工作台是否平穩，機器放置是否平穩。

　　 7. The grinding wheel cannot sharpen the knife normally: clean the grinding wheel.

8. When the slicing machine is working, the machine is unable to check whether the transmission belt is stained with oil or disconnected, check whether the capacitor is aging, and check whether the cutting edge of the lamb slicer blade is sharp.