Common faults and solutions of lamb slicing machine

　　 1、机器不工作：检查插头是否接触良好，再检查插座保险丝是否熔断。 如果不能排除故障，则需要由电气技术人员进行检查和修理。 非专业人士无法自行维修。

　　2. The body is electrified: you must unplug the power plug immediately, check whether the grounding is good, and ask an electrical technician to deal with it.

　　3. Poor slicing effect: check whether the blade is sharp; check whether the temperature of the frozen meat is in the range (0℃~ -7℃); refer to the manual sharpening method to re-sharp the blade edge.

　　4、托盘移动不顺畅：在移动圆轴上加润滑油，调整移动方轴下方的紧固螺丝。

　　 5. Abnormal noise when the mutton slicer is working: check whether the bolts of the machine are loose, check whether the lubricating oil in the moving part of the machine is used up, and check whether there is any minced meat on the circumference of the blade.

　　 6、机器震动或轻微噪音：检查工作台是否平稳，机器放置是否平稳。

　　 7. The grinding wheel cannot sharpen the knife normally: clean the grinding wheel.

8. When the slicing machine is working, the machine is unable to check whether the transmission belt is stained with oil or disconnected, check whether the capacitor is aging, and check whether the cutting edge of the lamb slicer blade is sharp.