Common faults and solutions of lamb slicing machine

　　 1. Hindi gumagana ang makina: tingnan kung maayos ang pagkakadikit ng plug, at pagkatapos ay suriin kung pumutok ang socket fuse. Kung hindi maalis ang fault, kailangan itong suriin at ayusin ng mga electrical technician. Ang mga hindi propesyonal ay hindi maaaring ayusin ito nang mag-isa.

　　2. The body is electrified: you must unplug the power plug immediately, check whether the grounding is good, and ask an electrical technician to deal with it.

　　3. Poor slicing effect: check whether the blade is sharp; check whether the temperature of the frozen meat is in the range (0℃~ -7℃); refer to the manual sharpening method to re-sharp the blade edge.

　　4. Ang tray ay hindi gumagalaw nang maayos: magdagdag ng lubricating oil sa gumagalaw na round shaft, at ayusin ang tightening screw sa ilalim ng gumagalaw na square shaft.

　　 5. Abnormal noise when the mutton slicer is working: check whether the bolts of the machine are loose, check whether the lubricating oil in the moving part of the machine is used up, and check whether there is any minced meat on the circumference of the blade.

　　 6. Panginginig ng boses ng makina o bahagyang ingay: Suriin kung stable ang workbench at kung maayos na nailagay ang makina.

　　 7. The grinding wheel cannot sharpen the knife normally: clean the grinding wheel.

8. When the slicing machine is working, the machine is unable to check whether the transmission belt is stained with oil or disconnected, check whether the capacitor is aging, and check whether the cutting edge of the lamb slicer blade is sharp.