Master some maintenance skills of 冷凍肉切片機

1. Slices are uneven, dull and produce more powder.

(1) Reasons: the blade is not sharp; the hardness of the sliced material is too high; the sticky juice of the sliced material will stick to the blade; even if it is not sliced, the force is uniform.

2、接通電源後，凍肉切片機電機不轉。

(1)原因：電源接觸不良或插頭鬆動； 開關接觸不良。

(2)維修方法：維修電源或更換插頭； 修理或更換同規格的開關。

3. When working, the cryostat motor stops rotating.

(1) Reason: The frozen meat slicer feeds too much, and the blade is stuck; the switch is in poor contact. Evenly

(2) Maintenance method: remove the blade and grind it with a whetstone; bake the thinly sliced material to soften it; remove the blade to grind away sticky juices;

(2) Maintenance method of cryostat: look at the cutter head and remove the sticky substance; adjust the switch contacts or replace the switch.

When using a frozen meat slicer, press the other side of the device with your hand, otherwise the material will jump and the meat will not be cut in the correct position. If the material is a bit large, the material can be processed to fit the size of the inlet slice.