使用方法 牛羊肉切片机

1. After receiving the beef and mutton slicer, you should check the outer packaging for any abnormality in time. If there is any abnormality, such as damage or lack of parts, please call the manufacturer in time, and then carefully read the manual equipped with the beef and mutton slicer to confirm. After the error is correct, you can proceed to the following steps.

2、然后检查电源电压是否与机器标签上标注的电压一致。

3. After unpacking, please place the machine on a firm workbench and try to stay away from the humid environment.

4. 调整刻度旋转以选择所需的切片厚度。

5、打开电源，按下启动开关启动刀片。

6. 将待切食物放在滑板上，推动食物固定臂面向刀片，靠着互动隔板左右移动。

7. 使用后，将刻度旋转回“0”位置。

8. How to disassemble the blade: first loosen the blade guard, then take out the blade cover, and use a tool to loosen the screw on the blade before taking out the blade. For the installation method of the blade, please refer to the above-mentioned removal method. (The blade is sharp, please pay attention to safety during installation and removal)