The assembly steps of the frozen meat slicer blade

The production capacity of frozen meat slicer is determined by the cutting capacity of the blade. Because the frozen meat must be discharged from the holes after cutting, the screw feeder can continue feeding, otherwise, no amount of feeding will work, on the contrary, material blockage will occur. The blade assembly steps are:

1. Install the left and right knife guards first.

2, turn the left and right slicing knife fixing knobs counterclockwise to exit.

3. Loosen the tilt angle adjustment wrench of the slicer knife of the frozen meat slicer.

4. Hold the back of the slicing knife with the blade facing up, and carefully insert the knife holder from the side.

5. Turn the blade fixing knob clockwise to evenly press the cutting blade of the frozen meat slicer without tightening it.

6. ബ്ലേഡ് ടിൽറ്റ് ആംഗിൾ അഡ്ജസ്റ്റ്മെന്റ് റെഞ്ച് നീക്കുക, കട്ടിംഗ് ബ്ലേഡിന്റെ പിൻ ആംഗിൾ ആവശ്യമുള്ള സ്ഥാനത്തേക്ക് ക്രമീകരിക്കുക, തുടർന്ന് ബ്ലേഡ് ടിൽറ്റ് ആംഗിൾ അഡ്ജസ്റ്റ്മെന്റ് റെഞ്ച് ബോൾട്ട് ശക്തമാക്കുക.

7. Turn the blade fixing knob clockwise to evenly clamp the cutting blade.

The blade is the main part of the frozen meat slicer, and the part that has more contact with meat. Its assembly must be strictly in accordance with the corresponding steps, and it must be tightened and fixed so that it can cut lamb for a long time.