Manual knife sharpening method for frossen kjøttskjærer

1. Plasser slipesteinen på et sted med høy friksjon, slik at den kan hindre at slipesteinen glir under friksjon og påvirke effekten.

2. If you only use a grindstone for polishing, sometimes the polishing will be very slow and the effect is not very good, so you can drop a small amount of dilute lubricating oil or liquid paraffin on it and wipe it evenly to increase the friction coefficient and accelerate the friction speed.

3. When the frozen meat slicer is sharpening the knife, the handle and the knife clamp should be installed on the slicer so that the blade is forward and placed flat on the grindstone surface.

4. When sharpening the knife, the fingers should keep the correct position so that the force is even and easy to slide. The blade is facing the front of the sharpener, and the slicing knife is obliquely advanced from the lower right corner of the grindstone to the upper left corner of the grindstone to the heel of the knife. , And then flip and sharpen the knife back and forth according to this step.

5. Hvis det er et gap på bladet, følg prosessen ovenfor for å fortsette å male gapet, og for noen mer skadede frosne kjøttskjæreblader, må du bruke to typer slipesteiner for sliping. Nå skal den grove slipesteinen slipes med stort gap. Slipp, og slip deretter bladet på en fin slipestein.