How to adjust the round knife of the frossen kødskærer after it is worn

1. Justering af tykkelsesjusteringsplade:

Løsn de to låsebolte. Tykkelsesjusteringspladen skal være tæt på den runde kniv, og mellemrummet mellem bladet og kniven skal være 1 til 2 mm. Spænd boltene.

2. Adjustment of the meat table of the frozen meat slicer:

Løsn de to låsebolte. Flyt kødbærerstøtten til højre. Spænd de to bolte.

3. Adjust the gap between the round knife of the frozen meat slicer and the meat loading table:

Loosen the big nut, and take it upwards. Loosen the locking screw. Adjust the screw to adjust the gap between the round knife and the meat carrier, and then tighten the locking screw. Install the meat loading table, confirm that the gap between the circular knife and the meat loading table is 3 to 4 mm, and adjust it to a good condition. Tighten the locking screw.

4. Delvis justering af skæreren på den frosne kødpålægsmaskine:

The round knife is worn and the diameter becomes smaller, so the sharpener should be lowered.

After the round knife of the frozen meat slicer is worn, you can adjust it according to the above methods, such as the adjustment plate and other parts, especially the more important adjustments that are in contact with the meat, so that the efficiency will be improved when it is used.