How to replace the blade of the frozen meat slicer
1. The frozen meat slicer is a machine that cuts thin and uniform tissue slices. The tissue is supported by hard paraffin or other materials. The slice thickness gauge is used to automatically advance each time it is cut. The thickness of the thickness gauge is usually 1 Micrometers. When cutting the paraffin-embedded tissue, because it adheres to the wax edge of the previous slice, multiple slices are made into slice strips.
2. The cutter head is driven by a transmission. The feed roller is driven by the cutter head through a set of changing gears. The knife plate of the stainless steel slicer is equipped with multiple blades according to the cutting size. The cutting length can be changed by changing the changing gear. Adjusting the transmission can change the speed of the belt.
3. Adjustment: When adjusting, first loosen and tighten the copper column nut, then turn the thickness of the nut and the copper column to adjust. After the thickness is adjusted, the nut and the copper column must be tightened. If the knife plate is parallel to the blade of the frozen meat slicer, do not turn it on. The cutter head must be lower than the blade before it can be turned on and cut. Adjust the thickness to about 3 mm, and the thinner to adjust.
4. Replacing the blade: Insert the hex handle into the hole on the side of the machine. Rotate the wheel to change the direction and then change the knife. When changing the knife, loosen the two hexagonal screws of the blade and insert the blade to replace it.
5.The slices are cylindrical or rectangular. Frozen meat slicers currently mostly use underwater pelletizers. Its advantage is that it can avoid the melt or the slices from contacting oxygen in the air, make the slices smooth, and eliminate the powder caused in granulation.