site logo

Operation details of mutton slicer in use

Operation details of κόφτης προβάτου σε χρήση

1. Strictly check whether the wiring is correct according to the wiring diagram of the frozen meat slicer and mutton slicer, whether the manual control of the jog and stop control is correct and reliable, and check whether the running direction of the main motor is correct.

2. Θα πρέπει να προστεθεί λιπαντικό στο κιβώτιο ταχυτήτων μείωσης του τροχού έλξης, η στάθμη λαδιού πρέπει να διατηρείται στο πάνω επίπεδο του ατέρμονα και η δεξαμενή υδραυλικού λαδιού πρέπει να προστεθεί με υδραυλικό λάδι κατά της φθοράς στη γραμμή στάθμης λαδιού .

3. Connect all the oil pipes according to the working principle, and only after confirming that there are no abnormal phenomena such as obstructions in the system of each component, can start the frozen meat slicer and mutton slicer for a test run.

4. Meat food must be frozen and hardened moderately, generally above “-6 ℃”, and should not be over-frozen. If the meat is too hard, it should be thawed first, and the meat should not contain bones to avoid damage to the blade.

5. Το πάχος των φετών κρέατος ρυθμίζεται προσθέτοντας ή μειώνοντας τη φλάντζα πίσω από τη λεπίδα. Πριν τη χρήση, ρίξτε λίγο μαγειρικό λάδι στο αυλάκι ολίσθησης για να μειώσετε την τριβή.

6. The knife handle in the right hand must be moved vertically up and down, and cannot be broken to the left (the direction of the meat block) during the movement, which will cause the knife to deform.

7. If the knife slips and cannot hold the meat after cutting a few hundred pounds, it means that the knife has stopped, and it should be sharpened.

Operation details of mutton slicer in use-Κόφτης αρνιού, τεμαχιστής βοείου κρέατος, μηχανή χορδών για αρνί/προβατίνα, μηχάνημα κορδονιών βοείου κρέατος, πολυλειτουργικός κόφτης λαχανικών, μηχανή συσκευασίας τροφίμων, εργοστάσιο Κίνας, προμηθευτής, κατασκευαστής, χονδρέμπορος